FY017 24v Electric DC Linear Actuator

Description

1. DC permanent magnet motor, simple and compact structure, made of pure metal stainless steel seamless steel tube, sturdy and durable;
2. Optional input voltage: 12V/24V/36V/48V DC;
3. According to the use requirements, the optional speed is from 5mm/s to 40mm/s;
4. Customizable itinerary (Stroke);
5. Thrust load is 100N to 1200N;
6. Conventional temperature: -15 ℃ to 45 ℃, can reach -40 ℃ to 60 ℃ under special customization;
7. Optional signal feedback type: potentiometer, Hall;
8. With built-in travel switch, there is a good self-locking function, no sliding or slipping;
9. The equipment has an overcurrent protection function;
10. The protection level is IP65:
(1) The product adopts alloy gear, high strength, long life and wear resistance;
(2) Passed CE certification, salt spray, waterproof, temperature test, with anti-corrosion function;
11. The slider can be customized before and after the product, and the selection is flexible and unlimited;
12. This product is widely used; special vehicles, mining properties, environmental sanitation industry, etc.

1. Determine the voltage: There are multiple choices of DC 12V 24 36V 48V 72V.
2. Determine the stroke of the push rod, that is, the range of motion of the push rod, which can be customized according to your requirements.
3. Determine the pushing speed of the putter. Different speeds correspond to different powers. The details are described in the details. You can also consult online or leave a message to me.
The power of the putter is related to the speed. The faster the speed, the smaller the power, and the slower the speed, the greater the power. The two are inversely proportional. Buyers can choose the appropriate speed and thrust motor according to the following parameter table: